Dash DCAF150 User Manual

For even results, some foods require shaking halfway through
the preparation time. See the Temperature & Time Chart for
recommendations. Remove the Crisper Drawer from the appliance and
shake it gently from side to side. Slide the Crisper Drawer back into the
Air Fryer.
Turn the Timer to the correct setting. When you set the Timer, the Air
Fryer will automatically turn on. The Heating Light will automatically turn
on. The Timer will begin to count down from the set time. The Heating
Light will blink during the air frying process. This is normal and indicates
that the heating element is controlling the temperature.
When you hear the Timer ring, the preparation time has elapsed. Pull
the Crisper Drawer out of the appliance and place it on a heat-resistant
surface. Check if the food is done. If the food is not ready, simply slide
the Crisper Drawer back into the appliance and set the Timer for a few
extra minutes.
To remove items from the Crisper Drawer use tongs. Don’t turn over the
Crisper Drawer to prevent any oil that has collected on the bottom of
the Crisper Drawer from being spilled onto the food. Excess oil from any
foods will be collected at the bottom of the Crisper Drawer. Allow the
appliance to cool before disposing of any excess oil.
5
4
6
7
∙ 11 ∙
using YOUR compact air fryerusing YOUR compact air fryer

Dash DCAF150 Specifications

General

Brand	Dash
Model	DCAF150
Category	Fryer
Language	English