∙ 16 ∙
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE SOLUTIONS
The Air Fryer does not work. The appliance is not plugged in.
Plug the mains plug into a grounded
wall socket.
You have not set the Timer.
Turn the Timer Dial to the required
preparation time to switch the
appliance on.
The food is not done after the
recommended time is elapsed.
Too much food has been added to
the Crisper Drawer.
Use less food and cook in batches if
necessary. Your food will also cook more
evenly.
The temperature was set too low.
Turn the Temperature Dial to the
required temperature setting (see
section “Settings”). Preheat for 5-10
minutes.
Food is fried unevenly in the Air
Fryer.
Certain types of food need to
be shaken halfway through the
preparation time.
Items that lie on top of or across each
other (e.g. fries) need to be shaken
halfway through the preparation time
(see section “Settings”).
Snacks are not crispy when they
come out of the Air Fryer.
The food was not dry enough or
needs a bit of oil.
Make sure to properly dry the food or
lightly brush some oil onto the snacks
for a crispier result.
I cannot slide the Crisper Drawer
into the appliance properly.
There is too much food in the
Crisper Drawer.
Do not ll the Crisper Drawer beyond
the MAX line.
White smoke is coming out of
the appliance.
Your food is too greasy.
When you fry greasy items in the Air
Fryer, a large amount of fat will leak into
the Crisper Drawer, the fat produces
white smoke and the Crisper Drawer
may heat up more than usual. This
does not affect the appliance or the
end result.
To Next Page
Loading...
Need help?
General
