∙ 17 ∙
troubleshooting
ISSUE SOLUTION
When using my Mini
Wafe Maker, the Cover
gets very hot.
Is this normal?
Yes, this is completely normal. When using
your
Multi-Plate Mini Maker, always lift and
lower the Cover by the Cover Handle. To
prevent personal injury, DO NOT lift the
Cover so that your arm is over the Cooking
Surfaces as it is hot and may cause injury.
Lift from the right side.
After using my Mini
Wafe Maker a few times,
food is starting to stick to
the surface.
What is happening?
There is probably a build-up of burnt food
residue on the Removable Plates. This is
normal, especially when cooking with sugar.
Allow the appliance to cool fully. Then, use a
damp, soapy cloth to wipe down the Plates.
Thoroughly rinse the cloth and wipe again.
If any food remains, pour on cooking oil and
let sit for a few hours, then scrub with a soft
bristled brush or soft sponge to wipe clean.
The Indicator Light
will not turn on and
the Removable Plates
are failing to heat.
1. Ensure that the power cord is plugged into
the power outlet.
2. Check to make sure the power outlet is
operating correctly.
3. Determine if a power failure has occurred
in your home, apartment or building.
To Next Page
Loading...
Need help?
General
