bydash.com
Using Your Blender
USING YOUR BLENDER
NOTE: ALWAYS MAKE SURE THE LID IS SECURE BEFORE BLENDING. KEEP HANDS OR
UTENSILS OUT OF THE PITCHER WHEN THE BLENDER IS IN USE.
1.
Place the motor base on a stable surface and plug it in.
2. Place the pitcher on the motor base. There should be a beep to indicate it is in place.
3. Place the ingredients for what you are making into the pitcher.
4. Put liquid ingredients in rst, then powdered ingredients, and then solid ingredients.
5. Make sure the lid is securely in place before engaging the appliance.
6. Press the power button to turn the blender on.
7. You can either choose one of the pre-set dial modes, or choose your own speed and
time. If you are choosing your own speed and time, set the pre-set dial on the Manual
Setting (middle setting).
8. Follow the “Blender Settings Guide” section to accurate choose the right setting.
9. Press the power button again to start the blender.
10. Use the tamper to make sure all the ingredients are mixed in properly.
11. After you are nished blending, unplug the blender.
12. Clean the pitcher immediately after each use.
13. You can use the Rinse setting to make cleaning easier.
To Next Page
Loading...
Need help?
General
