bydash.com
Safety Guidelines
IMPORTANT SAFETY GUIDELINES
When using electrical appliances, basic safety precautions should be followed, especially the
following:
• Please Read and Save this Instruction
Manual
• Read all instructions carefully.
• Remove all packaging and labels from appli-
ance prior to use.
• To protect against risk of electrical shock do
not put cord, plugs, or appliance in or near
water or other liquid.
• Any maintenance other than cleaning,
please contact StoreBound directly at:
1-800-898-6970 from 7AM - 7PM PST
Monday – Friday, or by email at support@
storebound.com.
• Keep appliance away from children when in
use.
• Unplug from outlet when not in use, during
assembly, during disassembly, and before
cleaning.
• Avoid contact with moving parts.
• Do not operate this appliance with a dam-
aged cord, damaged plug, after the appli-
ance malfunctions, is dropped, or damaged
in any manner.
• Use only attachments recommended or sold
by the manufacturer.
• Others may result in re, electric shock, or
injury.
• Do not use outdoors.
• Do not leave unattended when on.
• Do not let cord hang over edge of table,
hang over edge of counter, or touch hot
surfaces.
• Always make sure the pitcher is locked
securely in place before motor is engaged.
Do not remove pitcher before blender has
nished blending.
• Make sure dial is in the o position after
each use. Make sure the motor stops
completely before disassembling.
• Do not put your ngers or other objects into
the blender while it is in operation. If food
becomes lodged in the blades, turn off and
unplug before trying to remove.
• Do not use the appliance if any of the parts
are damaged.
• Do not use without lid in place.
• Keep hands and utensils away from moving
blades while appliance is engaged to reduce
the risk of severe injury or damage to the
blender.
• Blades in the blender are sharp. Handle
carefully. Wash using brush or gloves. Do
not touch small cutting blades in the base
of the pitcher.
• Do not place on or near a hot gas range, hot
electric burner, or in a heated oven.
• When cleaning do not submerse motor (with
electrical parts) in any liquid; instead use a
soft, wet cloth to wipe down.
• Do not run the blender when the pitcher is
empty.
• When blending thick or dry food for a
prolonged period of time, the temperature
monitoring system may shut down the motor
to prevent overheating. This may occur
when the Blender is overloaded. Unplug the
Blender and place the motor base in a well
ventilated area allowing it to cool down for
45 minutes. Try removing some of the food
before beginning to blend again.
• Make sure the Lid is closed tightly during
blending to prevent liquid from splashing
out.
To Next Page
Loading...
Need help?
General
