PAGE TITLE PAGE TITLE
using your deluxe wafe bowl maker ∙ 11 10 ∙ using your deluxe wafe bowl maker
USING YOUR deluxe waffle bowl MAKER USING YOUR deluxe waffle bowl MAKER
1 5
2 6
3 7
4
While the appliance is preheating, prepare your wafe recipe.
You can also prepare the recipe ahead of time, as the appliance
preheats quickly.
Remove your wafe bowl by using silicone or nylon tongs or
spatula. The wafe bowl will be hot!
Open the Cover of the Deluxe Wafe Bowl Maker by squeezing
the Latch at the front of the appliance, beneath the lip of the Cover
on the appliance.
Place the nished wafe bowl on a paper towel and allow it to
cool. If you are using your appliance to prepare another wafe
bowl, repeat the instructions above. If you will not be reusing your
Deluxe Wafe Bowl Maker, unplug the appliance and allow it to
cool before cleaning and transporting.
Pour ½ cup of batter into the Lower Cooking Surface of the
appliance. Gently close the Cover.
Place the Deluxe Wafe Bowl Maker on a stable surface.
Plug in the appliance. The Heating Light will turn on to signal that
the appliance is heating up. When the Heating Light turns off,
this means that the temperatures of both Cooking Surfaces are
sufciently ready for cooking. The preheating is complete.
Allow the wafe bowl to cook for about 3-5 minutes. Open the
Cover to test the doneness. When the surface of the wafe bowl
is golden brown and the Cover lifts easily, the wafe bowl is
complete. You may adjust your cooking time according to how
crispy or tender you would like your wafe bowl. The longer the
wafe bowl cooks, the crispier it will be.
NOTE: The recommended amount of batter for each wafe bowl is ½ cup.
Ensure that you do not add too much batter, as the wafe bowl will expand
while cooking and may overow if excess batter is used.
ATTENTION: The Deluxe Wafe Bowl Maker will get very hot during use.
DO NOT touch the Cover of the appliance during preheating and
throughout the cooking process.
To Next Page
Loading...
Need help?
General
