using your smartstore dehydrator ∙ 9
USING YOUR SMARTSTORE DEHYDRATOR
1. Place the Power Base on a clean, stable surface. Make sure
that there is nothing touching the Power Base that may
obstruct air circulation around the unit.
2. To assemble Food Trays (5), start from the bottom of stack
and rotate each Food Tray 180°F until the bottom corner
ridges sit onto the ridges of the Food Tray below.
3. Once stacked, place food on trays and cover with Lid.
4. Plug in the Power Cord, select your temperature using the
Temperature Dial then press the Power Button to turn on the
SmartStore Dehydrator.
5. When the dehydration cycle is complete, turn the
Temperature Dial to the lowest setting then press the Power
Button to turn off the device. Unplug the appliance and let
cool slightly before removing the Lid.
HOW TO USE YOUR SmartStore Dehydrator
*Note: All parts must be properly assembled before use.
To Next Page
Loading...
Need help?
General
