21
Move the cursor by pressing the Enter key. Change the values by pressing the Up or Down keys.
With the cursor fl ashing in the title block, press the Down key to see the next screen. The follow-
ing message will be displayed (entries are for reference only):
Move the cursor by pressing the Enter key. Change the values by pressing the Up or Down keys.
With the cursor fl ashing in the title block, press the Down key to see the next screen. The follow-
ing message will be displayed (entries are for reference only):
The unit may be set to either Stdby (Standby or Off). Press the Enter key to move the cursor from
unit to unit. Press the Up or Down key to change from Stdby to Off.
Once selections have been made and with the cursor fl ashing in the title block, press the Down
key to see the next screen. The following message will be displayed (entries are for reference
only):
Zone Master
Zone ID: 1
Units in Zone: 4
Units Online: 2
Pri/Sec schedules
Number Units On Pri: 3
Number Units On Sec: 1
Zone Airflow: Disabled
Zone Master
Temperature Assist: Yes
Standby On Delay: 30
Standby Off Delay: 900s
Enable Inhibit: Yes
Rotation: Day & Time
Monday at: 4:00 AM
Force Rotation: No
Zone Master Units
Note: U1 is the master
Pri Sec
Unit #1: Stdby Stdby
Unit #2: Stdby Stdby
Unit #3 Stdby Stdby
Unit #4 Stdby Off
Unit #5 Stdby Off
Zone Master Schedule
Current Cfg: Secondary
Override Active: No
Override Time: 1 Hrs
To Next Page
Loading...
