Datalogic PowerScan PM9500 series User Manual

LED and Beeper Indications
18 PowerScan™ PM9500
Table 3. Error Indicators
Green Spot
a
flashes
momentarily
Upon success-
ful read of a
label, the soft-
ware turns the
green spot on
for the time
specified
N/A N/A
Image
Capture
When ready to
capture image
Blue light
flashes 2 times
when updating
N/A
a
Except when in sleep mode or when a Good Read LED Duration other than 00
is selected
INDICATION DESCRIPTION LED BEEPER
Link Attempt
The reader is try-
ing to link to the
base
Slow Flashes N/A
Configuration
Alignment
Reader and Base
are aligning the
parameters' con-
figuration
Fast Flashes N/A
Link
The reader has
successfully
linked to the base
N/A
3 beeps of
ascending fre-
quency
Unlink
The reader has
unlinked from
the base
N/A
3 beeps of
descending
frequency
ROM Failure
There is an error
in the reader's
software/pro-
gramming
Flashes
Reader sounds
one error beep
at highest vol-
ume.
INDICATION DESCRIPTION LED BEEPER

Datalogic PowerScan PM9500 series Specifications

General

Connectivity	Cordless
Sealing	IP65
Light Source	LED
Image Capture	Yes
Battery Type	Lithium-Ion
Weight	400 g / 14.1 oz
Radio Range	Up to 100 m / 328 ft
Radio Frequency	433 MHz
Drop Resistance	Withstands repeated drops from 2.0 m / 6.6 ft onto concrete
Supported Symbologies	1D, 2D, Postal
Interface	RS-232, USB, Keyboard Wedge
Operating Temperature	-20 to 50 °C / -4 to 122 °F
Storage Temperature	-40 to 70 °C / -40 to 158 °F
Humidity	5 to 95% non-condensing
Dimensions	212 x 110 x 74 mm / 8.3 x 4.3 x 2.9 in
Power Supply	External power adapter