Need help?Do you have a question about the Datalogic PowerScan PM8300 and is the answer not in the manual?
General| Connectivity | Wireless |
|---|---|
| Radio Frequency | 2.4 GHz |
| Scanning Technology | Laser |
| Protection Class | IP65 |
| IP Rating | IP65 |
| Power Supply | Rechargeable Li-ion battery |
| Type | Handheld |
| Decode Capability | 1D |
| Battery Life | 50, 000 scans per charge |
| Drop Resistance | 2.0 m |
| Interface | USB, RS-232, Keyboard Wedge |
| Scan Rate | Up to 100 scans/sec |
| Resolution | 0.1 mm (4 mil) |
| Supported Barcodes | UPC, EAN, Code 128 |
| Operating Temperature | -20°C to 50°C (-4°F to 122°F) |
| Storage Temperature | -40 to 70 °C / -40 to 158 °F |
| Humidity | 5% to 95% (non-condensing) |
Sets the scanner to operate with PM8300 devices in a compatible mode.
Pairs the reader with the cradle for network setup.
Selects the RS-232 serial interface for communication.
Selects the Keyboard Wedge interface for PC connection.
Selects the USB interface for scanner connection.
Sets the communication speed for RS-232 interface.
Configures the parity bit for RS-232 communication.
Selects keyboard layout for Wedge interface.
Defines identifiers for scanned codes.
Specific settings for the 16-key keypad.
Configures header for keypad data.
Configures terminator for keypad data.
Selects between Simple Data Input and QTY/CODE modes.
Settings for Quantity/Code operational mode.
Describes standard scanner-to-host data communication format.
Extended message formatting for 16-key DK models.
To Next Page
