Enter Configuration Exit and Save Configuration
Product Reference Guide
63
DATA FORMAT
Keypad Specific Formatting
KEYBOARD DATA FORMAT ENABLE/DISABLE
This feature allows you to enable/disable specific formatting for data
entered by keyboard and barcode labels read by the scan engine.
Use this command only if you require differentiation in formatting between
scanned barcodes and data that is input from the keyboard. Refer to the
standard Data Format section for other formatting options.
Keyboard Data Format = disable (same as code)
Keyboard Data Format = enable (different format allowed)
If you enable different formatting you must define the desired format, oth-
erwise the default data form
at will be used.
To Next Page
Loading...
