Name: Datalogic PowerScan PM8300
Brand: Datalogic
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Enter Configuration Exit and Save Configuration

Product Reference Guide

Code Identifier

Code Identifier = disable

DEFAULT

Code Identifier = Datalogic standard

Code Identifier = AIM standard

Code Identifier = custom

Custom Code Identifier

define custom code identifier(s)

1. Read the above code. (Code Identifiers default to Datalogic stan-

dard, see table on previous page).

2. Select the code type from the code table

in Appendix B for the iden-

tifier you want to change.

3. You can define 1 or 2 identifier characters for each code type. If only

identifier character is required, the second character must be

selected as FF (disabled). Read the hexadecimal value corresponding

to the character(s) you want to define as identifiers for the code

selected in step 2. : valid characters are in the range 00-FD.

Example: To define Code 39 Code Identifier = @

Datalogic PowerScan PM8300 User Manual

Other manuals for Datalogic PowerScan PM8300