Need help?Do you have a question about the Datalogic PowerScan PD9530 and is the answer not in the manual?
General| Type | Handheld bar code reader |
|---|---|
| Sensor type | Laser |
| Tilt reading angle | 0 - 360 ° |
| Pitch reading angle | -40 - 40 ° |
| Linear (1D) barcodes supported | - |
| Standard interfaces | RS-232, USB, Keyboard wedge |
| Connectivity technology | Wired |
| Product color | Black, Yellow |
| International Protection (IP) code | IP65 |
| Input voltage | 5 V |
| Power consumption | 350 mA |
| Power source type | DC |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating temperature (T-T) | -20 - 50 °C |
| Operating relative humidity (H-H) | 0 - 95 % |
| Cables included | No |
Weight and Dimensions| Depth | 110 mm |
|---|---|
| Width | 74 mm |
| Height | 212 mm |
| Weight | 330 g |
Details on PowerScan 2D readers, models, and features.
Step-by-step guide for connecting and configuring the reader with its host.
Instructions for installing, connecting, and configuring the BC9xx0 base station.
Guide to selecting and setting the correct interface type for the reader and host connection.
Overview of parameters for reader customization via bar codes.
Detailed explanations of Baud Rate, Stop Bits, Parity, and Handshaking Control.
Configuration options for Wedge, Intercharacter, and Intercode delays.
Information on Data Matrix DPM Decoding Safety and Set Length controls.
Features for customizing message strings with prefixes, suffixes, and Label IDs.
Settings for double read timeout, LED/Beeper indicators, and scan modes.
To Next Page
