Datalogic PowerScan PD9530 User Manual

Product Reference Guide 63
READING PARAMETERS
DOUBLE READ TIMEOUT on page 64 SCANNING ACTIVE TIME on page 74
LED AND BEEPER INDICATORS on page
66
STAND ILLUMINATION CONTROL on page
74
POWER ON ALERT on page 66 FLASH ON TIME on page 75
GOOD READ: WHEN TO INDICATE on page
66
FLASH OFF TIME on page 75
GOOD READ BEEP TYPE on page 67 AIMING POINTER on page 76
GOOD READ BEEP FREQUENCY on page
67
AIMING DURATION TIMER on page 76
GOOD READ BEEP LENGTH on page 68 GREEN SPOT DURATION on page 77
GOOD READ BEEP VOLUME on page 69
PARTIAL LABEL READING CONTROL on
page 77
GOOD READ LED DURATION on page 70 DECODE NEGATIVE IMAGE on page 78
SCAN MODE on page 71 IMAGE CAPTURE on page 78
STAND MODE INDICATION on page 72 MULTIPLE LABELS PER FRAME on page 79
PICK MODE on page 72
MULTIPLE LABELS ORDERING BY CODE
S
YMBOLOGY on page 80
STAND MODE SENSITIVITY on page 73
MULTIPLE LABELS ORDERING BY CODE
L
ENGTH on page 80
STAND MODE ILLUMINATION OFF TIME
on page 73

Datalogic PowerScan PD9530 Specifications

General

Type	Handheld bar code reader
Sensor type	Laser
Tilt reading angle	0 - 360 °
Pitch reading angle	-40 - 40 °
Linear (1D) barcodes supported	-
Standard interfaces	RS-232, USB, Keyboard wedge
Connectivity technology	Wired
Product color	Black, Yellow
International Protection (IP) code	IP65
Input voltage	5 V
Power consumption	350 mA
Power source type	DC
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	-20 - 50 °C
Operating relative humidity (H-H)	0 - 95 %
Cables included	No

Weight and Dimensions

Depth	110 mm
Width	74 mm
Height	212 mm
Weight	330 g