Datalogic PowerScan PD9530

Product Reference Guide 205
MOTION FEATURES
MOTION AIMING CONTROL on page 205
MOTION SENSITIVITY on page 206
MOTIONLESS TIMEOUT on page 206
Use this chapter to configure motion settings for the handheld.
Reference Appendix C, for a listing of standard factory
s
ettings.
Motion Aiming Control
Configures the ability of the scanner to Enable/Disable the Aiming system
when motion is detected.
$CMOMD00(CR)
Motion Aiming Control = Disable
$CMOMD01(CR)
Motion Aiming Control = Enable
DEFAULT