Datalogic PowerScan PD9530

$CADOT1C(CR)
Optional Add-on Timer = 280ms
$CADOT1E(CR)
Optional Add-on Timer = 300ms
Enter/Exit Programming Mode
100 PowerScan™ PD9530/PBT9500/PM9500
Optional Add-On Timer (continued)
Optional GS1-128 Add-On Timer
This option sets the timer expiration value to read the added part after
reading the linear EAN/UPC part. For UPC/EAN add-ons other than those of
that type, see "Optional Add-On Timer" on
page 98.
DEFAULT
$CADUT00(CR)
Optional GS1-128 Add-On Timer = Disable
$CADUT01(CR)
Optional GS1-128 Add-On Timer = 10ms
$CADUT02(CR)
Optional GS1-128 Add-On Timer = 20ms
$CADUT03(CR)
Optional GS1-128 Add-On Timer = 30ms