Datalogic PowerScan PD9530

2D Global Features Enter/Exit Programming Mode
Product Reference Guide 183
Data Matrix DPM Decoding Safety
This feature defines the tolerance of DPM decoding software to operate with
poor quality labels. Decoding Safety is used to configure a barcode symbol-
ogy decoder to be very aggres
sive to very conservative depending on a par-
ticular customer’s needs. Higher tolerance to poor quality labels increases
the reading capability of
the scanner.
See page 283 for more information on this feature.
DEFAULT
$CDMDA01(CR)
Data Matrix Decoding Safety = 1 (Aggressive)
$CDMDA02(CR)
Data Matrix Decoding Safety = 2
$CDMDA03(CR)
Data Matrix Decoding Safety = 3
$CDMDA04(CR)
Data Matrix Decoding Safety = 4
$CDMDA05(CR)
Data Matrix Decoding Safety = 5 (Conservative)
This feature is valid for the PD9530-DPM model only.