Datalogic PowerScan PD9530

Enter/Exit Programming Mode
98 PowerScan™ PD9530/PBT9500/PM9500
Optional Add-On Timer
This option sets the time the reader will look for an add-on when an add-on
fragment has been seen and optional add-ons are enabled. (Also see
"Optional GS1-128 Add-On Timer" on page 10
0.)
$CADOT01(CR)
Optional Add-on Timer = 10ms
$CADOT02(CR)
Optional Add-on Timer = 20ms
$CADOT03(CR)
Optional Add-on Timer = 30ms
$CADOT04(CR)
Optional Add-on Timer = 40ms
$CADOT05(CR)
Optional Add-on Timer = 50ms
$CADOT06(CR)
Optional Add-on Timer = 60ms
$CADOT07(CR)
Optional Add-on Timer = 70ms
DEFAULT
$CADOT0A(CR)
Optional Add-on Timer = 100ms