Need help?Do you have a question about the Datalogic PowerScan PBT9501 and is the answer not in the manual?
General| Harmonized System (HS) code | 84716070 |
|---|---|
| Type | Handheld bar code reader |
| Wavelength | 680 nm |
| Sensor type | LED |
| Scanner type | 1D/2D |
| Scanner resolution | 0.1016 mm |
| Tilt reading angle | 0 - 360 ° |
| Pitch reading angle | -40 - 40 ° |
| Light levels (direct sunlight) | 0 - 100000 lx |
| Linear (1D) barcodes supported | - |
| Optical sensor resolution (W x H) | 864 x 544 pixels |
| 2D (matrix & stacked) barcodes supported | Aztec Code, Data Matrix, Han Xin, MaxiCode, Micro QR Code, QR Code |
| Bluetooth version | 3.0 |
| Operating frequency | 433 - 910 MHz |
| Standard interfaces | Bluetooth, RS-232 |
| Connectivity technology | Wired & Wireless |
| Certification | IEC 62471 |
| Product color | Black, Yellow |
| LED indicators | Yes |
| Image formats supported | BMP, JPEG, TIFF |
| International Protection (IP) code | IP65 |
| Warranty period | 3 year(s) |
| Sustainability certificates | REACH, RoHS |
| Battery life | 10 h |
| Battery type | Built-in battery |
| Charging time | 4.5 h |
| Input voltage | 10-30 V |
| Battery capacity | 3350 mAh |
| Power consumption | 150 mA |
| Power source type | Battery |
| AC adapter output voltage | 110 V |
| Number of reads per charge | 60000 |
| Cables included | DC, RS-232 |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating temperature (T-T) | -20 - 50 °C |
| Operating relative humidity (H-H) | 0 - 95 % |
Weight and Dimensions| Depth | 74 mm |
|---|---|
| Width | 110 mm |
| Height | 212 mm |
| Weight | 380 g |
Details core functionalities like omni-directional operation, decoding, formatting, and imaging capabilities.
Explains the autoscan command for continuous scanning and monitoring the reading area.
Describes the use of flash technology for upgrading the reader with new features and symbologies.
Details the process of charging the reader's batteries using the cradle or multi-battery charger.
Provides step-by-step instructions for removing and replacing the battery pack in the scanner.
Explains how to use programming bar codes to reconfigure reader settings and features.
Describes scanning a bar code to restore the reader to its initial factory configuration settings.
Guides users to scan the 'Set Date' barcode along with YYMMDD for date configuration.
Guides users to scan the 'Set Time' barcode along with HHMMSS for time configuration.
Steps to link a handheld scanner to its base station for RF communication.
Instructions for pairing the scanner with a Bluetooth adapter using the Serial Port Profile.
Explains the requirement for a Variable PIN Code with some Bluetooth drivers and how to input it.
Sets the country mode to U.S. for localized PC settings via Bluetooth HID.
Sets the country mode to Belgium for localized PC settings via Bluetooth HID.
Bar code to enter and exit the HID Caps Lock State programming section.
Enables the Caps Lock function for character data transmission via Bluetooth HID.
Enables the HID Alt Mode feature for character data transmission.
Scan the bar code to shut off power to the handheld until the next trigger pull.
Explains the different scanning modes available for the imager, like Trigger Single and Trigger Hold.
Describes the default scan mode where scanning is active until a condition is met.
Enables the aiming system to activate based on detected motion (Motionix technology).
Enables Pick Mode, only acknowledging barcodes within the configurable distance.
Details physical dimensions and weight of the PowerScan PBT9501 scanner.
Covers battery type, charging time, operating autonomy, and cradle power specifications.
Lists the various 1D barcode symbologies that the reader can decode.
Lists the various 2D and stacked barcode symbologies, including postal codes.
Indicates the maximum wireless range of the scanner in open air.
States the maximum number of scanners that can connect to a single base station.
Describes the LED and beeper signals for normal operations like power-up and good reads.
Lists LED and beeper codes that indicate specific error conditions.
Explains how to retrieve error codes related to Field Replaceable Units (FRU) after startup.
Warns against using abrasive agents and spraying liquids directly onto the unit.
Outlines the one-year warranty for defects in materials and workmanship.
Details the procedure for obtaining warranty service, including RMA and return shipping.
Provides recommendations to avoid or minimize the risk of ergonomic injury during use.
Explains how to find datasheets, manuals, and software on the Datalogic website.
Instructions on using barcodes to enter numeric digits as from a keypad.
To Next Page