Datalogic PowerScan PBT9501

Operating Mode
Quick Reference Guide 19
Operating Mode (continued)
Motion Aiming Control
This feature configures the ability of the scanner to
Enable/Disable the Aiming system when motion is
detected (Motionix™ motion-sensing technology). Scan
the Enter/Exit Programming bar code above, then either
of the barcodes below.
ENTER/EXIT PROGRAMMING MODE
 Scan Mode =
Trigger Single
Scan Mode = Trigger
Pulse Multiple
Scan Mode =
Trigger Hold Multiple
Scan Mode = Flashing
Scan Mode = Always On
Scan Mode = Stand Mode
 Motion Aiming Control =
Enable
Motion Aiming Control =
Disable