EasyManuals Logo

Datalogic PowerScan PBT9501 User Manual

Datalogic PowerScan PBT9501
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #30 background imageLoading...
Page #30 background image
Pick Mode
20 PowerScan™ PBT9501
Pick Mode
Pick Mode is a Decoding and Transmission process where
bar codes that are not within the configurable distance
from the center of the aiming pattern are not acknowl-
edged or transmitted to the host. It is active only in Trigger
Single mode. If the scanner switches to a different Read
Mode, Pick Mode is automatically disabled.
Multiple Label Reading
The reader offers a number of options for multiple label
reading. See the PRG or software configuration tool for
descriptions of these features and programming labels.
NOTE
This feature is not compatible with Multiple
Labels Reading in a Volume. See the PRG for
more information.
ENTER/EXIT PROGRAMMING MODE

PIck Mode = Disable
Pick Mode = Enable

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Datalogic PowerScan PBT9501 and is the answer not in the manual?

Datalogic PowerScan PBT9501 Specifications

General IconGeneral
Harmonized System (HS) code84716070
TypeHandheld bar code reader
Wavelength680 nm
Sensor typeLED
Scanner type1D/2D
Scanner resolution0.1016 mm
Tilt reading angle0 - 360 °
Pitch reading angle-40 - 40 °
Light levels (direct sunlight)0 - 100000 lx
Linear (1D) barcodes supported-
Optical sensor resolution (W x H)864 x 544 pixels
2D (matrix & stacked) barcodes supportedAztec Code, Data Matrix, Han Xin, MaxiCode, Micro QR Code, QR Code
Bluetooth version3.0
Operating frequency433 - 910 MHz
Standard interfacesBluetooth, RS-232
Connectivity technologyWired & Wireless
CertificationIEC 62471
Product colorBlack, Yellow
LED indicatorsYes
Image formats supportedBMP, JPEG, TIFF
International Protection (IP) codeIP65
Warranty period3 year(s)
Sustainability certificatesREACH, RoHS
Battery life10 h
Battery typeBuilt-in battery
Charging time4.5 h
Input voltage10-30 V
Battery capacity3350 mAh
Power consumption150 mA
Power source typeBattery
AC adapter output voltage110 V
Number of reads per charge60000
Cables includedDC, RS-232
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)-20 - 50 °C
Operating relative humidity (H-H)0 - 95 %
Weight and Dimensions IconWeight and Dimensions
Depth74 mm
Width110 mm
Height212 mm
Weight380 g

Related product manuals