To Next PageTo Next Page
Need help?Do you have a question about the Datalogic PowerScan PBT9100 and is the answer not in the manual?
General| Harmonized System (HS) code | 84716070 |
|---|---|
| Type | Handheld bar code reader |
| Sensor type | LED |
| Scanner type | 1D |
| Yaw reading angle | -70 - 70 ° |
| Scanner resolution | 0.13 mm |
| Tilt reading angle | -45 - 45 ° |
| Pitch reading angle | -75 - 75 ° |
| Linear (1D) barcodes supported | Codabar, Code 11, Code 128, Code 32, Code 39, Code 39 (ASCII), Code 93, EAN 128, GS1 DataBar, IATA, ISBN, Industrial 2 of 5, Interleaved 2 of 5, MSI, Plessey, UPC-A, UPC-E |
| 2D (matrix & stacked) barcodes supported | - |
| Wireless range | 100 m |
| Bluetooth version | 3.0 |
| Operating frequency | 2.4-2480 MHz |
| Standard interfaces | Bluetooth, RS-232 |
| Connectivity technology | Wireless |
| Certification | IEC 62471 |
| Product color | Black, Yellow |
| LED indicators | Yes |
| International Protection (IP) code | IP65 |
| Battery life | 10 h |
| Battery type | Built-in battery |
| Charging time | 4.5 h |
| Input voltage | 10-30 V |
| Battery capacity | 3350 mAh |
| Power consumption | 500 mA |
| Power source type | Battery |
| AC adapter output voltage | 110 V |
| Number of reads per charge | 60000 |
| Power consumption (typical) | 10 W |
| Cables included | DC, RS-232 |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating temperature (T-T) | -20 - 50 °C |
| Operating relative humidity (H-H) | 5 - 95 % |
| Warranty period | 3 year(s) |
| Sustainability certificates | RoHS |
Weight and Dimensions| Depth | 74 mm |
|---|---|
| Width | 110 mm |
| Height | 240 mm |
| Weight | 405 g |
| Base dimensions | 212 x 110 x 74 mm |
Describes the PowerScan 9100 as a family of imager readers offered in various models.
Provides steps for connecting the reader and establishing communication with its host.
Outlines the three main steps to set up the BC9xx0 cradle: physical installation, connections, and configuration.
Lists the items included in the cradle package and mounting options for desktop or wall use.
Describes the two types of mounting brackets (Desktop and Wall) and their usage.
Describes the multi-interface and power supply connectors on the BC9xx0 cradle.
Explains how to connect and disconnect the interface cable to the Host connector on the cradle.
Details three methods for configuring the BC9xx0: Aladdin software, PC strings, or programming bar codes.
Guides users to select the correct interface type by scanning a bar code from a table.
Explains how to scan interface bar codes to configure system interface types and associated settings.
Guides further customization of reader settings after interface selection, covering various parameter groups.
Explains how to change default parameters to meet application needs, organized by logical groups.
Lists sections for configuring RS-232, RS-232/USB-Com, and Keyboard emulation settings.
Covers Data Format and Reading Parameters that are configurable across all interface types.
Details features specific to wireless operation, including Bluetooth and PM9100 models.
Provides guidance on configuring symbology-dependent options for various bar code types.
Outlines interface features configurable by all interface types, starting with Host Commands.
Specifies whether the reader obeys or ignores host commands, defining exceptions.
Details programming options for USB Keyboard and Wedge interfaces, referencing standard defaults.
Details feature settings for USB interfaces, specifically for the USB-OEM interface type.
Covers features used to build user-defined data into message strings, including prefix, suffix, and AIM ID.
Sets up to 20 ASCII characters as a prefix or suffix for bar code data.
Enables or disables the addition of AIM IDs for all symbology types, which identify bar code symbology.
Prevents double reads of the same label by setting a minimum time between reads of identical labels.
Lists indications for reader functions and errors, including power-up beeps and good read signals.
Selects the reader's scan operating mode, with options like Trigger Single, Hold Multiple, and Flashing.
Lists configuration options for various bar code symbologies, including enable/disable and specific parameters.
Provides options for configuring beeper behavior for RF operation, including transmission beeps and frequency.
Covers automatic configuration updates and copying configurations between scanner and base station.
Details batch mode options for storing labels when disconnected, including automatic and manual modes.
Explains setting a configurable PIN code to authenticate Bluetooth devices and encrypt data.
Enables or disables authentication and encryption for the Bluetooth link, affecting device unlinking.
Specifies the 4 or 16-character PIN code for Bluetooth link authentication, requiring security mode enablement.
Allows selection of PIN code length, either 4 or 16 characters, for Bluetooth security.
Covers additional Bluetooth features like reconnect attempt interval and HID modes.
Sets the valid wait time before transmission between reader and Base Station is considered failed.
Specifies the transmission protocol for Star communications, detailing ACK options.
Offers the ability to enable or disable the keypad, allowing key programming.
Programs function keys by associating them with predefined commands or custom strings.
Allows the PowerScan 16K model to operate in Normal Mode or Quantity/Code Mode.
Details parameters for the RS-232 interface, including baud rate, stop bits, parity, and handshaking.
Covers settings for keyboard interfaces like Wedge and USB, including quiet intervals and delays.
Explains decoding safety and length control for various bar code symbologies.
Covers features for building user-defined data into message strings with prefixes, suffixes, and Label IDs.
Allows adding ASCII characters as prefixes or suffixes to bar code data across all symbologies.
Enables or disables the addition of AIM IDs for all symbology types for label identification.
Defines customizable codes to identify bar code symbology types, with pre-loaded sets or individual settings.
Lists parameters controlling reader behavior and status indicators like LED and beeper settings.
Covers scan operating modes such as Trigger Single, Hold Multiple, and Flashing.
Details options and programming for wireless communication features, including beeper settings and configuration updates.
Outlines features specific to Bluetooth models, including security, PIN codes, and client management.
Details voltage and current specifications for PD9130, PBT9100, and PM9100 models.
Lists performance metrics like light source, tolerances, resolution, and depth of field.
Lists all supported symbologies and bar code types that the reader can decode.
Provides standard pinout information for RS-232, USB, and Keyboard interface cables.
