Datalogic PowerScan PBT9100 - I 2 of 5 Decoding Levels

Enter/Exit Programming Mode
124 PowerScan™ PD9130/PBT9100/PM9100
I 2 of 5 Decoding Levels
This configuration item applies to Interleaved 2 of 5, Datalogic 2 of 5 and Stan-
dard 2 of 5.
Decoding Levels are used to configure a bar code symbology decoder to be
very aggressive to very conservative depending on a particular customer’s
needs.
2 of 5 Decoding Level = Disable
2 of 5 Decoding Level = 1
2 of 5 Decoding Level = 2
2 of 5 Decoding Level = 3
DEFAULT
2 of 5 Decoding Level = 4
2 of 5 Decoding Level = 5