Enter/Exit Programming Mode
54
PowerScan™ PD9130/PBT9100/PM9100
LABEL ID
A Label ID is a customizable code of up to three ASCII characters (convert to
Hex using the ASCII Chart on the inside back cover of this manual), used to
identify a bar code symbology type. It can be appended previous to or fol-
lowing the transmitted bar code data depe
nding upon how this option is
enabled. This feature provides options for configuring custom Label IDs or
individually per symbology (see "Individually Set Label ID" on
page 55). If
you wish to program the reader to always include an industry standard label
i
dentifier for ALL symbology types, see the previous feature "Global AIM ID"
on page 51.
See Label ID, starting on page 302 of “References” for more information on
setting this feature.
Label ID: Pre-Loaded Sets
The reader supports two pre-loaded sets of Label IDs. See Label ID: Pre-
loaded Sets, starting on page 302 for details on the USA set and EU set.
CAUTION
Label ID Pre-loaded Set = USA Set
Label ID Pre-loaded Set = EU Set
DEFAULT
When changing from one Label ID set to another, all other
reader configuration settings, including the host interface type,
will be erased and set to the standard factory defaults. Any
custom configuration or custom defaults will be lost.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
