Enter/Exit Programming Mode
248
PowerScan™ PD9130/PBT9100/PM9100
STAR Radio Transmit Mode
Specifies the transmission protocol for Star communications.
Options are:
• ACK from cradle to scanner — signals a good
transmission as soon as
the Base Station receives a label
• ACK when sent to host — scanner sign
als a good transmission as soon
as the Base Station has sent the label to the host
• ACK from host — scanner signals a go
od transmission as soon as the
Base Station has sent the label to the host and host has replied with an
acknowledge message.
ACK from cradle
ACK when sent to host
ACK from host
ACK from host works only for RS-232 or USB-COM interfaces with ACK/NACK disabled.
If ACK from host is configured with any other interface conditions, it works like ACK
when sent to host. See
Message Formatting on page 313
for details.
For this feature to be operational,
the scanner must be set to Ignore Host Commands
(see
page 23
).
To Next Page
Loading...
Need help?
General
Weight and Dimensions
