Enter/Exit Programming Mode
Product Reference Guide
227
DIRECT RADIO AUTOLINK
This feature enables/disables the ability to link a wireless handheld to a
base station without scanning the Unlink label first.
DEFAULT
Direct Radio Link = Unlink Label Required
Direct Radio Link = Automatic Unlinking
RF ADDRESS STAMPING
These features allow configuration of source radio data inclusion.
Source Radio Address Transmission
Enables/disables the ability of source radio address information to be
transmitted to the host and, if so, at what position with respect to the label
data. See page 310 in “References” for detailed information and examples
for setting this feature.
DEFAULT
Source Radio Address Transmission = Do Not Include
Source Radio Address Transmission = Prefix
When included as a prefix, the source-radio ID is displayed after all label for-
matting has been applied. The 6 byte hex
address is sent as 12 ascii charac-
ters, i.e., an address of 00 06 66 00 1A ED wi
ll be sent as (shown in hex): 30 30
30 36 36 36 30 30 31 41 45 44
To Next Page
Loading...
Need help?
General
Weight and Dimensions
