Enter/Exit Programming Mode
Product Reference Guide
159
ABC Codabar Dynamic Concatenation Timeout
This parameter specifies the timeout in 10-millisecond ticks used by the ABC Codabar
Dynamic Concatenation Mode. The timeout can be set within a range of 05 to 255 in 10ms
increments. A setting of zero specifies no delay.
Select ABC Codabar Dynamic Concatenation
Timeout Setting
To configure this feature, scan the ENTER/EXIT
bar code above, then the bar code at left fol-
lowed by digits from the Alphanumeric charac-
ters in
Appendix D, Keypad representing your
desired character(s). End by scanning the
ENTER/EXIT bar code again.
Make a mistake? Scan the CANCEL bar code to
abort and not sa
ve the entry string. You can then
start again at the beginning.
CANCEL
10 = Quiet Interval of 200 ms
ABC Codabar Force Concatenation
Forces labels starting or ending with D to be concatenated.
DEFAULT
ABC Codabar Force Concatenation = Disable
ABC Codabar Force Concatenation = Enable
To Next Page
Loading...
Need help?
General
Weight and Dimensions
