Enter/Exit Programming Mode
Product Reference Guide
235
Bluetooth Security Mode
This feature enables/disables authentication and encryption of the Blue-
tooth link. Use the feature Bluetooth PIN Code, d
escribed below, to specify
the length and digits in the PIN code used to authenticate the Bluetooth
Link.
DEFAULT
Bluetooth Security Mode = Disable
Bluetooth Security Mode = Enable
Changing the security mode setting will unlink the devices. If the Automatic Configura-
tion Update is set to the default
“Enabled” setting, the devices must only be relinked. If
the Automatic Configuration Update is set to “Disabled,” the Security Mode setting
must also be updated in the Base Station using Aladdin. After the Base Station has
been updated, the devices must be relinked.
Bluetooth PIN Code
After enabling Security Mode (see Bluetooth Security Mode described
above), specify whether you want to set a 4-digit or a 16-digit PIN Code.
See page 312 for detailed information and exa
mples for setting this feature.
Select 4-character Bluetooth PIN Code
Select 16-character Bluetooth PIN Code
Select PIN Code Length
To Next Page
Loading...
Need help?
General
Weight and Dimensions
