Need help?Do you have a question about the Datalogic PowerScan PD9531-AR and is the answer not in the manual?
General| Type | Handheld Barcode Reader |
|---|---|
| Scan Engine | 2D Imager |
| Light Source | LED |
| Skew Angle | ± 60° |
| Humidity | 5% to 95% (non-condensing) |
| IP Protection Class | IP65 |
| Scanning Technology | Imaging |
| Scan Pattern | Area Imaging |
| Depth of Field | Up to 30 cm (depending on barcode) |
| Tilt Angle | +/- 65° |
| Pitch Angle | +/- 65° |
| Supported Barcodes | 1D, 2D |
| Connectivity | Wired |
| Interfaces Supported | USB, RS-232, Keyboard Wedge |
| Power Supply | 5V DC |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -40°C to 70°C |
| Drop Resistance | 2 m (6.5 ft) |
| Reading Range | Up to 800 mm |
Core steps for unboxing and preparing the scanner for initial use.
Procedures for physically installing the base station and its mounting brackets.
Choosing and setting the host communication interface type for data transfer.
Overview of programming options via software, strings, or barcodes.
Detailed settings for specific communication interfaces like RS-232 and USB.
Customizing data output with prefixes, suffixes, and label identifiers.
Selecting scanner operation modes and specific scanning behaviors.
Configuring audio and visual feedback for scanner status and operations.
Settings for various 1D barcode types including UPC-A and Code 128.
Customizing beep sounds for wireless operations like transmission and alarms.
Securing Bluetooth connections with PIN codes and security modes.
Device performance, electrical, and environmental data.
Overview of factory default parameter settings for quick reference.
Input methods via keypad bar codes and keyboard scancode mappings.
To Next Page
