2D Global Features Enter/Exit Programming Mode
Product Reference Guide
199
QR Code Set Length 2
This feature specifies one of the bar code lengths for QR Code Length Con-
trol. Length 2 is the maximum label length if in Variable Length Mode, or
the second fixed length if in Fixed Length M
ode. Characters can be set from
0001 to 7,089 characters in increments of 0001 (pad with zeroes).
See page 290 for detailed instructions on setting this feature.
Select QR Code Length 2 Setting
To configure this feature, scan the ENTER/EXIT
PROGRAMMING MODE bar code above, then the bar
code at left followed by the digits from the Alphanu-
meric characters in
Appendix D, Keypad
repre-
senting your desired character(s). End by scanning
the
ENTER/EXIT bar code again.
Make a mistake? Scan the CANCEL bar code t
o abort
and not save the entry string. You can then start
again at the beginning.
CANCEL
Length 2 is 7,089 Characters