Datalogic PowerScan PD9531-AR - Bluetooth HID Alt Mode; Bluetooth HID Send Unknown ASCII Char

Enter/Exit Programming Mode
Product Reference Guide 231
Bluetooth HID Alt Mode
Enable/Disable the ability to correctly transmit a label to the host regardless
of the Bluetooth HID Country Mode selected, when Bluetooth HID Profile is
configured.
Read the configuration command label be
low for the HID Alt Mode feature.
HID Alt Mode = OFF
DEFAULT
DEFAULT
HID Alt Mode = ON
Bluetooth HID Send Unknown ASCII Char
Unknown characters are characters the host does not recognize. When Dis-
able HID Send ASCII Unknown character is selected, all barcode data is sent
e
xcept for unknown characters, and an error beep will sound. When
HID
Send Unknown ASCII character
is enabled, an unknown character will be
sent as a SPACE.
DEFAULT
HID Send Unknown ASCII character = Disable
HID Send Unknown ASCII character = Enable