Enter/Exit Programming Mode
214
PowerScan™ PD9531-AR/PBT9501-AR/PM9501-AR
CONFIGURATION UPDATES
See page 304 in “References” for detailed information and examples of these
features.
Automatic Configuration Update
When this feature is enabled, a reader and its linked Base Station can auto-
matically ensure they stay in sync with
regard to application hardware and/
or configuration. See page 304 for more information on this feature.
Automatic Configuration Update = Disable
Automatic Configuration Update = Enable
DEFAULT
Copy Configuration to Scanner
Scan the following label to copy the current Base Station configuration to the
scanner. Use this method when the Auto Configuration Update feature is
disabled and you want a one-time configuration update to be performed on
the scanner.
Do not scan an ENTER/EXIT PROGRAMMING MODE label with this bar
code.
Copy Configuration to Scanner
To Next Page
Loading...
