2D Global Features Enter/Exit Programming Mode
Product Reference Guide
183
China Sensible Code Set Length 1
Specifies one of the bar code lengths for China Sensible Code Length Con-
trol. Length 1 is the minimum label length if in Variable
Length Mode, or the
first fixed length if in Fixed Length Mode. Characters can be set from 0001
to 7,8
27 characters in increments of 0001 (pad with zeroes).
See page 289 for detailed instructions on setting this feature.
Select China Sensible Code Length 1 Setting
To configure this feature, scan the ENTER/EXIT
PROGRAMMING MODE bar code above, then the bar
code at left followed by the digits from the Alphanu-
meric characters in
Appendix D, Keypad
repre-
senting your desired character(s). End by scanning
the
ENTER/EXIT bar code again.
Make a mistake? Scan the CANCEL bar code t
o abort
and not save the entry string. You can then start
again at the beginning.
CANCEL
0001 = Length 1 is 1 Character
To Next Page
Loading...
Need help?
General
