Datalogic PowerScan PD9531-AR User Manual

Enter/Exit Programming Mode
252 PowerScan™ PD9531-AR/PBT9501-AR/PM9501-AR
Display Off Timeout
Sets the timeout for display, backlight and keyboard.
Display Off Timeout = Disabled
Set Display Off Timeout
To configure this feature, scan the ENTER/EXIT
PROGRAMMING MODE bar code above, then the bar
code at left followed by two digits from the Alphanu-
meric characters in
Appendix D, Keypad repre-
senting your desired character(s). End by scanning
the ENTER/EXIT ba
r code again.
Make a mistake? Scan the CANCEL bar code to abort
an
d not save the entry string. You can then start
again at the beginning.
CANCEL
DEFAULT
08 = 8 second delay
Backlight Enable
Enables/Disables the display backlight.
DEFAULT
Backlight Disabled
Backlight Enabled

Datalogic PowerScan PD9531-AR Specifications

General

Brand	Datalogic
Model	PowerScan PD9531-AR
Category	Barcode Reader
Language	English