Datalogic PowerScan PD9530

Enter/Exit Programming Mode
224 PowerScan™ PD9530/PBT9500/PM9500
Power Off
See “Power Off” on page 20 for information about this feature.
Powerdown Timeout
The Powerdown Timeout feature sets the time for automatically switching
the unit off when the imager has been idle.
$CSLPS00(CR)
Powerdown Timeout = Disable
$CSLPS01(CR)
Powerdown Timeout = 10 minutes
$CSLPS02(CR)
Powerdown Timeout = 20 minutes
R)$CSLPS03(CR
)
Powerdown Timeout = 30 minutes
DEFAULT
DEFAULT
$CSLPS06(CR)
Powerdown Timeout = 60 Minutes (1 Hour)
$CSLPS0C(CR)
Powerdown Timeout = 120 Minutes (2 Hours)