Product Reference Guide
1
Chapter 1
Compatibility with PM8300
Compatibility Mode
In order to use the PM9300 together with PM8300 devices, you must switch
the scanner in compatible mode.
When in compatible mode, the Scanner can recognize a subset of PM8300
co
mmands, listed on this Manual.
It is possible to still uses the standard configuration manual or Aladdin in
order to configure parameters not present here.
Changing from Normal to Compatible Mode
PM9300 Handheld
1. With the PM9300, read the Compatible Mode bar code.
Compatible Mode
2. Read the restore default command.
Restore Default
3. Follow the procedure described at page 3.
When the PM9300 is in Compatible Mode, some newer features (such
as communication speed programming) will not be available.
To Next Page
Loading...
Need help?
General
