Datalogic PowerScan PM8300

Product Reference Guide 81
Chapter 8
Message Formatting
Standard Message Formatting
The system always provides scanner to host data communication using the
following:
For PowerScan™ M8300 models with display, if the RS-232 interface is
selected for communication between the Host and the BC-80X0 cradle, then
the following additional communications between Host and Scanner can
occur:
• The Host can send messages to a
ny scanner associated with that cradle
to control the Scanner’s display, LEDs and beeper.
• The Scanner can send up to 3 user-defined characters to the Host using
t
he 3 command keys on the Scanner.