Datalogic PowerScan PM8300

Compatibility Mode
Product Reference Guide 3
POWERSCAN™ M8300/BC-80X0 STAND-ALONE SETUP
Follow the procedure below to set the radio address and bind PowerScan™
M8300 to the BC-80X0 cradle.
1. Enter Configuration
2. Set Date
+
six digits for Day, Month and Year (DDMMYY)
3. Set Time
+
four digits for Hour and Minutes (HHMM)
4. Set Radio Address
+
four digits for the PowerScan™ M8300 Address (from 000
0 to1999).
All readers used in the same area must have different addresses.