Compatibility with PM8300
4
PowerScan™ PD9330/PBT9300/PM9300
5. Exit and Save Configuration
6. Read the Bind code to pair the PowerScan™ M8300 to the BC-80X0
cradle. The reader is dedicated to the cradle. Any previously bound
reader will be excluded.
To connect several readers to the same cradle see the following paragraph
‘Using Multiple M8300 Series Readers with Same Cradle'.
Bind
The green LED on the PowerScan™ M8300 will blink; the reader is ready to
be inserted into the cradle.
7. Firmly insert the reader into the BC-80X0 cradle within 10 seconds,
a beep will be emitted, signaling that the BC-80X0 cradle has been
paired to the PowerScan™ M8300, and the green LED on the reader
will go off.
8. Read the BC-80X0 restore default code:
Restore BC-80X0 Default
Go to INTERFACE SELECTION on page 12.
To Next Page
Loading...
Need help?
General
