Compatibility Mode
Product Reference Guide
5
Using Multiple M-Series Readers with Same Cradle
If you want to use several M-Series readers with the same BC-80X0 cradle,
you must first Bind the cradle with one of the readers (see previously
described configuration procedure).
Successive readers can be associated with the same cradle by following the
configuration procedure substituting the Bind command with Join (step 7).
7. Join
The green LED on the PowerScan™ M8300 will blink: the reader is ready to
be positioned onto the cradle. Complete step 8.
END of procedure.
CAUTION
All readers associated with the same cradle must have different addresses.
YOUR READER IS NOW READY TO READ BARCODES.
To change the defaults see CHANGING DEFAULT SETTINGS on page 14.
To Next Page
Loading...
