About the Scanner
QUICK REFERENCE GUIDE
3
The 4-key keyboard has two fully
configurable generic Function keys
(F1 and F2) and two arrow keys.
These keys are fully customizable to
perform specific tasks (e.g. scrolling
the list of items, navigating menus,
etc.).
For all related features and how to
configure them, refer to the Product
Reference Guide.
The 16-key keyboard is active in
numeric data-entry mode by default.
It means you can enter any numeric
combination including '.' (F2 key).
By pressing the yellow arrow key
(bottom left corner) you switch to the
alphanumeric keyboard which
enables the T9-type data entry mode
(i.e. consecutive and rapid pressing of
the same key makes different
characters appear on the display).
Additional function keys are available:
• F1 key turns ON/OFF the backlight
of the keyboard
• F3 key deletes the last character
entered
• F4 key clears the entire screen
To send the numeric / alphanumeric
string to the host, press the green
Enter key in the lower right corner.
To Next Page
Loading...
Need help?
General
