Datalogic PowerScan PM9600 Series User Manual

Changing the Batteries
QUICK REFERENCE GUIDE 33
CHANGING THE BATTERIES
1. Push in and slide the battery lock down to open the
battery door, as shown below.
2. Open the battery door and extract the battery.
3. Invert the sequence to insert the battery and lock the
battery door.
WARNING: Do not incinerate, disassemble, short
terminals or expose to high temperature. Risk of
fire, explosion. Use specified charger only. Risk of
explosion if the battery is replaced by an incorrect
type. Dispose of the batteries as required by the
relevant laws in force.

Datalogic PowerScan PM9600 Series Specifications

General

Brand	Datalogic
Model	PowerScan PM9600 Series
Category	Barcode Reader
Language	English