Datalogic QuickScan i QD2100 Quick Reference Guide

4QuickScan
TM
i
Always On —
No trigger pull is required to read a barcode. Scanning
is continually on. If the trigger is pulled, the reader acts as if it
is in Trigger Single Mode. Double Read Timeout
1
prevents
undesired multiple reads while in this mode.
Stand Mode — No trigger pull is required to read a bar code. Scan-
ning is turned on automatically when an item is placed in read-
er’s field of view. If the trigger is pulled, the reader acts as if it
in
Trigger Single mode. Double Read Timeout
2
prevents un-
desired multiple reads while in this mode.
Trigger Object Sense — This mode is similar to Stand Mode, ex-
cept that a trigger pull is required to activate the decoder.
Scan Mode = Trigger Single
Scan Mode = Trigger Hold Multiple
Scan Mode = Trigger Pulse Multiple
1. Double Read Timeout is programmed using the PRG.
2. Double Read Timeout is programmed using the PRG.

Datalogic QuickScan i QD2100 Specifications

General

Scan speed	8 sec/page
Wavelength	610 nm
Tilt angle range	-65 - 65 °
Decoding standards	1D / GS1 DataBar China Post GS1 DataBar Expanded/ Stacked/ Stacked Omnidirectional
Dimensions (WxDxH)	170 x 66 x 71 mm
Standard interfaces	RS-232, USB, Keyboard wedge
Input voltage	5 V
Power consumption	340 mA
Product color	White
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	5 - 95 %

Weight and Dimensions

Weight	121.9 g