QuickScan Mobile Reader Configuration
Quick Reference Guide 11
YOUR READER IS NOW READY TO READ CODES.
5.
Read the Bind code to pair the QuickScan
TM
Mobile reader to the
cradle.
The reader is dedicated to the cradle. Any previously bound reader will
be excluded.
Bind
Ì$+RN0$-IÎ
The green LED on the QuickScan Mobile reader will blink: the reader is
ready to be positioned onto the cradle.
6. Firmly position the reader onto the cradle within 10 seconds, a beep
will be emitted, signaling that the QuickScan Mobile cradle has been
paired to the QuickScan Mobile reader.
7. Now you can configure the QuickScan Mobile cradle by reading
configuration barcodes.
To Next Page
Loading...
Need help?
General
