To Next PageTo Next Page
Need help?Do you have a question about the Datalogic QuickScan Mobile and is the answer not in the manual?
General| Type | Handheld Barcode Reader |
|---|---|
| Connectivity | Bluetooth, USB |
| Scanning Range | Up to 30 cm |
| Storage Temperature | -20°C to 60°C |
| Supported Symbologies | 1D |
| Operating Temperature | 0 to 50 °C / 32 to 122 °F |
| Drop Resistance | 1.5 meters |
| Interface | USB |
| Power Supply | Rechargeable Lithium-ion battery |
| Humidity | 5% to 95% non-condensing |
Explains how to aim the reader at the barcode for optimal scanning.
Details how to use the QuickScan Mobile when placed on its cradle.
Step-by-step guide to connect and start using the reading system.
Instructions on how to safely remove and replace the reader's battery.
Explains how to connect the QuickScan Mobile cradle to a host system.
Covers RS-232, USB, IBM USB POS, Wedge, IBM Port, and Pen Emulation connections.
Overview of methods to configure the reader, including barcodes and software.
Guide for setting up the reader without a host connection.
How to select the appropriate interface for the reader.
Settings for the RS-232 serial interface.
Settings for USB interfaces (COM, KBD, IBM).
Settings for keyboard wedge interface, including nationality and lock states.
Configuration options for Pen Emulation mode.
Configuration for IBM 46xx series cash registers.
Customizing how barcode data is formatted before transmission.
Settings related to reader operation modes and feedback.
Parameters to optimize barcode decoding under various conditions.
Enabling or disabling specific barcode symbologies and their options.
Creating complex data transmission formats based on barcode content.
Settings for wireless communication and data transmission.
Detailed explanations of RS-232 parameters like handshaking and protocols.
Details on Pen Emulation parameters like output pulse and code conversion.
Information on IBM 46xx data formatting and transmission.
Explanation of header/terminator selection and output message formats.
Specifications for reader and cradle electrical components like battery and supply voltage.
Details on the sensor, illuminator, and resolution of the reader.
Operating and storage conditions, humidity, and protection class.
Physical dimensions, weight, and material specifications.
Specifications related to radio frequency, bit rate, and transmission range.
Maximum number of devices and base stations supported.
Explains the meaning of LED and beeper signals for reader and cradle status.
Commands for configuring device settings via serial interface.
String commands for RS-232 settings like baud rate, parity, and handshaking.
String commands for USB settings like nationality, FIFO, and delays.
String commands for Wedge settings like keyboard nationality and CAPS/NUM lock.
String commands for Pen Emulation parameters like operating mode and output pulse.
String commands for data formatting, headers, terminators, and special keys.
String commands for reader operation modes like trigger and beeper settings.
String commands for decoding settings like ink spread and safety.
String commands for enabling/disabling barcode symbologies and their options.
String commands for radio settings like timeouts and batch mode.
