Datalogic QuickScan Mobile - ELECTRICAL FEATURES; OPTICAL FEATURES; ENVIRONMENTAL FEATURES

TECHNICAL FEATURES
145
5 TECHNICAL FEATURES
QuickScan
®
Mobile Reader and Cradle
Electrical Features - READER
Battery Type 1 Lithium battery 700 mAh
Time of recharge Lithium max 6 hours with USB cable
Operating autonomy typical 20000 reads
Indicators LED, Beeper
Max scan rate 235 scans/sec
Electrical Features - CRADLE
Supply voltage
5 VDC ± 5%
Power consumption max. 4 W (charging)
LED Indicators
Battery charging red
Charge completed green
Power / Data yellow
Optical Features
Sensor CCD solid state (2088 pixels)
Illuminator LED array
Wavelength 630 ~ 670 nm
Max. LED Output Power 0.33 mW
LED safety class Class 1 EN 60825-1
Reading field see reading diagram
Max. resolution 0.10 mm, 4 mils
PCS minimum 20% (Datalogic Test Chart)
Environmental Features – READER
Working Temperature
0°to + 40 °C (32° to 104 °F)
Storage Temperature
(without battery)
-20° to 70 °C (-4° to 158 °F)
Humidity 90% non condensing
Drop resistance
IEC 68-2-32 Test ED 1.5 m (4 ft 9 in)
Protection class IP30
Environmental Features - CRADLE
Working temperature 0° to 40 °C (32° to 104 °F)
Storage temperature -20° to 70 °C (-4° to 158 °F)
Humidity 90 % non condensing
Protection class
IP30