Datamax I-class series - 4.2.2 Media Settings

I-Class
Displayed Message Details
MENU MODE The Menu Key has been pressed, where:
ENTER PASSWORD
0 0 0 0
Requires entry of the correct security password for
menu access.
KEEP HOST CHANGES?
ENTER=YES
Requires a decision regarding existing host commands
that have affected the configuration of the printer,
where pressing ENTER will save these changes or
pressing ESC will discard them.
SAVE CHANGES?
ENTER = YES
Requires a decision regarding changes that have been
made to the printer’s settings, where pressing ENTER
will save these changes or pressing ESC will discard
them.
 Note: If required, a reset will automatically occur.
The fol
lowing designations are used throughout the menu listings below:
Symbol Definition

Denotes a firmware default setting or value.
Denotes a setting can only be changed via the menu.
4.2.2 Media Settings
The
Media Settings menu contains label and ribbon settings, and printhead maintenance
selections.
Menu Item Details
MEDIA TYPE
Selects the method used to print labels and should be
set according to the typ
e of media being used, where:
THERMAL TRANSFER Sets printing for media that requires a ribbon to
produce an image.
DIRECT THERMAL
Sets printing for media that is reactive to heat to
produce an image.