Datamax I-class series - Page 45

I-Class
Communications (continued)
Menu Item Details
9600 BPS
19200 BPS
28800 BPS
38400 BPS
57600 BPS
115000 BPS
1200 BPS
2400 BPS
4800 BPS
Is the speed in Bits Per Second.
PROTOCOL Sets the data flow control (handshaking) method.
BOTH Uses XON/XOFF and CTS/DTR flow control.
SOFTWARE XON/XOFF
HARDWARE CTS/DTR
NONE Flow control is not used.
PARITY Sets word parity, where:
NONE Uses parity.
ODD Uses odd parity.
EVEN Uses even parity.
DATA BITS Sets Word length, where:
8 (7 - 8) Is the number of bits in the word.
STOP BITS Sets the number of stop bits, where:
1 (1 - 2) Is the stop bit count.
SERIAL PORT B Controls the RS-232 communications settings for
optional Serial Port B; see SERIAL PORT A.
 Note: The maximum baud is 38.4K BPS.
SERIAL PORT C Controls the RS-232 communications settings for
optional Serial Port C; see SERIAL PORT A.
 Note: The maximum baud is 38.4K BPS.