I-Class
Communi
ca
tions
(continued)
Menu Item Details
SERIAL PORT D Controls the RS-232 communications settings for
optional Serial Port D; see SERIAL PORT A.
Note: The maximum baud is 38.4K BPS.
PARALLEL PORT A
Controls the communications settings for Parallel Port
A, where:
PORT DIRECTION Allows data return from the printer, where:
UNIDIRECTIONAL Returns no data; communication is one-way.
BIDIRECTIONAL Returns data (compliant back-channel operation).
PARALLEL PORT B Controls the communications settings for optional
Parallel Port B; see PARALLEL PORT A.
Note: The default setting is BIDIRECTIONAL.
NIC ADAPTER
Controls the communications settings for the network
interface, where:
QUICK SETUP
Note: Only when equipped with DMXNetII or
DMXrfNetII.
Selects settings to configure basic Wired or WiFi
operations, where:
WIRED DHCP Selects Wired operation, where:
WIRED DHCP?
CANCEL KEY = YES
Returns the NIC Adapter to defaults then sets Wired
Discovery to “Enable” and Wireless to “Disable.”
WLAN UNSECURED Selects WiFi operation, where:
WLAN UNSECURED?
CANCEL KEY = YES
Returns the NIC Adapter default values then sets
Discovery to “Enable,” SSID to “Any,” and WLAN
network type to “Infrastructure.”
WLAN ADHOC Selects the DMXrfNetII default parameters, where:
To Next Page
Loading...
