I-Class
4.3 The Test Menu
The TEST Key accesses
six resident format selections that are printed at selected heat and
speed settings (see Section 4.1.4 for printing details).
Notes: (1) With the exception of the Configuration Label, all test labels require full
width media to capture the entire format.
(2) During a test, press the
Key or the Key to stop printing.
(3) Use PRINT TEST RATE (Section 4.2.7) to de
lay printing.
4.3.1 Print Quality Label
The Print Quality Label can be used to ensure conformance
and visual aesthetics.
4.3.2 Configuration Label
The C
onfiguration Label provides database information, as
detailed in Section 4.2.
Notes: (1) Label contents vary with application
version, model, and options.
(2) Use at least 2 inch (51mm) wide media and
set the Lab
el Width accordingly (see
Section 4.2.2).
(3) Bulleted items indica
te host changes not
yet saved.
PARALLEL PORT A
PORT DIRECTION
UNI-DIRECTIONAL
PARALLEL PORT A
NOT INSTALLED
COMMUNICATIONS
SERIAL PORT A
BAUD RATE
9600 BPS
PROTOCOL
BOTH
PARITY
NONE
DATA BITS
8
STOP BITS
1
SERIAL PORT B
NOT INSTALLED
SERIAL PORT C
NOT INSTALLED
SERIAL PORT D
NOT INSTALLED
USB PORT
NOT INSTALLED
SYSTEM INFORMATION
PRINT BUFFER SIZE
100 in.
FLASH SIZE
2 MB
RAM TEST
PASS
OPTIONAL LANGUAGES
FRANCIAS.DLN
ITALIANO.DLN
DEUTSCH.DLN
ESPANOL.DL
ONF
CONFIGURATION
TUE 09 09 AM 29JUL2008
PRINTER KEY
308-TB10-020312-001
APPLICATION VERSION
83-228 -11E 11.05 07/07/2008
MCL Version 1.20.02-126
BOOT LOADER
83-2269-11A 11.01 10/02/2007
UNLOCKED
*NONE
FPGA
*
MACO
NOT SET
MACR
00-90-c9-01-d0-8
To Next Page
Loading...
